Author Topic: Manufacturer BIOS Passwords  (Read 5766 times)

admin

  • Administrator
  • Newbie
  • *****
  • Posts: 44
Manufacturer BIOS Passwords
« on: October 08, 2011, 06:56:58 AM »
Other BIOS Passwords by Manufacturer Manufacturer Password VOBIS &
IBM merlin
Dell Dell
Biostar Biostar
Compaq Compaq
Enox xo11nE Epox
central Freetech
Posterie IWill iwill Jetway spooml
Packard Bell bell9 QDI QDI
Siemens SKY_FOX TMC BIGO
Toshiba Toshiba Toshiba BIOS

At boot-up note the BIOS provider (Award, AMI, Phoenix, IBM, etc.)

AWARD_SW
j262
HLT
SER
SKY_FOX
BIOSTAR
ALFAROME
Lkwpeter
j256
AWARD?SW
LKWPETER
syxz
ALLy
589589
589721
awkward
CONCAT
d8on
CONDO
j64
szyx


For AMI BIOS’ try these backdoor passwords:

AMI
BIOS
PASSWORD
HEWITT RAND
AMI?SW
AMI_SW
LKWPETER
A.M.I.
CONDO
For PHOENIX BIOS’ try this backdoor password:

phoenix

AWARD BIOS
AWARD SW, AWARD_SW, Award SW, AWARD PW, _award, awkward, J64, j256, j262, j332, j322, 01322222, 589589, 589721, 595595, 598598, HLT, SER, SKY_FOX, aLLy, aLLY, Condo, CONCAT, TTPTHA, aPAf, HLT, KDD, ZBAAACA, ZAAADA, ZJAAADC, djonet, %øåñòü ïpîáåëîâ%, %äåâÿòü ïpîáåëîâ%

AMI BIOS
AMI, A.M.I., AMI SW, AMI_SW, BIOS, PASSWORD, HEWITT RAND, Oder

Other passwords you may try (for AMI/AWARD or other BIOSes)

LKWPETER, lkwpeter, BIOSTAR, biostar, BIOSSTAR, biosstar, ALFAROME, Syxz, Wodj

Note that the key associated to "_" in the US keyboard corresponds to "?" in some European keyboards (such as Italian and German ones), so -- for example -- you should type AWARD?SW when using those keyboards. Also remember that passwords are Case Sensitive. The last two passwords in the AWARD BIOS list are in Russian.

Flashing BIOS via software

If you have access to the computer when it's turned on, you could try one of those programs that remove the password from the BIOS, by invalidating its memory. However, it might happen you don't have one of those programs when you have access to the computer, so you'd better learn how to do manually what they do. You can reset the BIOS to its default values using the MS-DOS tool DEBUG (type DEBUG at the command prompt. You'd better do it in pure MS-DOS mode, not from a MS-DOS shell window in Windows). Once you are in the debug environment enter the following commands:

AMI/AWARD BIOS

Code:
O 70 17
O 71 17
QPHOENIX BIOS

Code:
O 70 FF
O 71 17
Q
« Last Edit: October 08, 2011, 06:59:58 AM by admin »